AD Directory
New ADs via RSSAirworthiness directives, searchable.
The free Federal Register–sourced AD reference for general aviation. Search by AD number, make, or keyword. Checked every weekday.
10,463 results
Airworthiness Directives; Rolls-Royce Deutschland Ltd & Co KG Engines
The FAA is superseding Airworthiness Directive (AD) 2021-26- 13, which applied to all Rolls-Royce Deutschland Ltd & Co KG (RRD) Model Trent 1000-A2, Trent 1000-AE2, Trent 1000-C2, Trent 1000-CE2, Trent 1000-D2, Trent 1000-E2, Trent 1000-G2, Trent 1000-H2, Trent 1000- J2, Trent 1000-K2, and Trent 1000-L2 engines. AD 2021-26-13 required revision of the engine Time Limits Manual (TLM) life limits of certain critical ro…
Airworthiness Directives; Rolls-Royce Deutschland Ltd & Co KG Engines
The FAA is adopting a new airworthiness directive (AD) for certain Rolls-Royce Deutschland Ltd & Co KG (RRD) Model Trent 1000 engines. This AD was prompted by reports of excessive wear on the inner seal fins of certain high-pressure turbine (HPT) triple seals. This AD requires an inspection of the HPT triple seal for excessive wear and, depending on the results of the inspection, replacement of the HPT triple seal a…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-100-1A10 airplanes. This AD was prompted by multiple reports of erratic electrical system status on the push button annunciators (PBAs) and the engine instrument and crew alerting system (EICAS) while on-ground and during flight. This AD requires a records check and replacement of affected left-hand (LH) direct current powe…
Airworthiness Directives; The Boeing Company Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 747-8 and -8F series airplanes. This AD was prompted by reports of cracking in stringers and splice fittings located at stringer splices at multiple body stations. This AD requires an inspection of each free flange of the stringers at the stringer splice for the presence of radius fillers at fastener locations, an inspection…