Bombardier airworthiness directives
100 ADs showing 100 of 700 in the reference matching Bombardier — from the Federal Register, checked every weekday. Applicability may depend on serial and effectivity: verify against the official AD before any maintenance action.
Reference last synced: 10/22/2026 16:00 UTC · 10,462 ADs indexed
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-700-2A12 airplanes. This AD was prompted by reports of low clearance in the right wing between the fuel line flexible coupling and the harness support bracket clip-nut, between the fuel line flexible coupling and hydraulic system, and between the hydraulic system and fuel vent tube. This AD requires rectifying the low clear…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc. Model BD-700-1A10 and BD-700-1A11 airplanes. This AD was prompted by an in-service event where a main landing gear tire burst upon landing. This AD requires an inspection to determine if an affected brake control unit (BCU) is installed and replacement of affected BCUs. This AD also prohibits the installation of affected parts. The F…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is superseding Airworthiness Directive (AD) 2025-17- 12, which applied to all Bombardier, Inc., Model CL-600-1A11 (600) and CL-600-2A12 (601) airplanes and certain Model CL-600-2B16 (601-3A, 601- 3R, and 604 Variants) airplanes. AD 2025-17-12 required revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. Since the FAA issued…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-700-2A12 airplanes. This AD was prompted by reports of missing or under torqued fasteners on the slat 2 cove rib 6 brackets. This AD requires a general visual inspection (GVI) of affected fasteners on slat 2 cove rib 6 brackets to determine if all fasteners are installed and applicable on-condition actions. The FAA is issui…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-700-1A10, BD-700-1A11, and BD-700- 2A12 airplanes. This AD was prompted by reports that certain seat frames were assembled without applying Loctite in certain locations of concern. This AD requires modification to the non-locking fastener joints of the seat frame assembly. The FAA is issuing this AD to address the unsafe co…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-700-1A10 and BD-700-1A11 airplanes. This AD was prompted by reports that inappropriate tooling was used to torque the bolts securing the baggage door stop fittings, which may have resulted in an improper torque condition. This AD requires performing a torque check of affected bolts and re-torquing, re- installing, or replac…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-700-1A10 and BD-700-1A11 airplanes. This AD was prompted by a determination that the approach speed adders and landing distance factors must be corrected in the airplane flight manual (AFM) tables in the non-normal procedure for the SLAT FAIL (Caution) crew alerting system (CAS) message. This AD requires revising the existi…
Airworthiness Directives; Bombardier Inc. Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Bombardier Inc. Model CL-600-1A11 (600), CL-600-2A12 (601), and CL-600- 2B16 (601-3A, 601-3R, and 604 Variants) airplanes. This AD was prompted by a report of uncommanded nose wheel steering upon landing with touchdown on the runway centerline. This AD requires replacing the nosewheel steering rudder pedal potentiometer universal coupling setscrews. This…
Airworthiness Directives; Bombardier Inc. Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier Inc. Model BD-700-1A10 and BD-700-1A11 airplanes. The FAA previously sent this AD to all known U.S. owners and operators of these airplanes. This AD was prompted by discrepancies in the locking features on certain network interfaces. This AD requires installing locking features on certain network interfaces to prevent unapproved access to…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Bombardier, Inc., Model BD-100-1A10 airplanes. This AD was prompted by a report that some parts of horizontal stabilizer trim actuators (HSTAs) that were meant to be replaced through a required overhaul were not replaced and were instead reinstalled on the HSTAs. This AD requires verification of the HSTA serial number, and, if applicable, replacement of…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Bombardier, Inc., Model BD-100-1A10 airplanes. This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This AD requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. The FAA is issuing this AD to address the un…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Bombardier, Inc., Model CL-600-2A12 (601) and CL-600-2B16 (601-3A, 601- 3R, and 604 Variants) airplanes. This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This AD requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Bombardier, Inc., Model CL-600-2B16 (604 Variant) airplanes. This AD was prompted by reports that the flap system on-board recorder (FSOBR) interfaces with the flap control unit signals and may result in the flap control unit monitors tripping, causing Flap Fail messages and possibly an uncommanded flap movement. This AD requires the disconnection of the…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Bombardier, Inc., Model CL-600-1A11 (600) and CL-600-2A12 (601) airplanes, and certain Model CL-600-2B16 (601-3A, 601-3R, and 604 Variants) airplanes. This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This AD requires revising the existing maintenance or inspection program, as applicable, to inc…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-700-1A10 airplanes. This AD was prompted by a report indicating that the clearance between therapeutic flexible oxygen hoses and electrical harnesses may be non-compliant to design requirements, and that positive separation mechanisms and appropriate protective barriers may not have been installed in accordance with the app…
Airworthiness Directives; Bombardier Inc. Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier Inc. Model BD-700-1A10 and BD-700-1A11 airplanes. This AD was prompted by a report that incorrect information was found in certain calculation tables in a section of the airplane flight manual (AFM) that addresses certain slat-flap conditions. This AD requires revising the Non-Normal Procedures section of the existing AFM to provide the fl…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-700-1A10 and BD-700-1A11 airplanes. This AD was prompted by reports of engine-driven pump hydraulic pressure hoses for hydraulic systems number 1 and 2 chafing against the pylon in the aft equipment bay. This AD requires an inspection of the engine-driven pump pressure hoses for any damage and minimum clearance between the…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is superseding Airworthiness Directive (AD) 2020-19- 13, which applied to certain Bombardier, Inc., Model CL-600-1A11 (600), CL-600-2A12 (601), and CL-600-2B16 (601-3A, 601-3R, and 604 Variants) airplanes. AD 2020-19-13 required a check to identify the manufacturer and part number of the portable oxygen bottle installation, and, if necessary, modification of the portable oxygen bottle installation. This AD c…
Airworthiness Directives; Bombardier Inc. Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier Inc. Model BD-700-1A10 and BD-700-1A11 airplanes. This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This AD requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. The FAA is issuing this AD…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Bombardier, Inc., Model BD-700-2A12 airplanes. This AD was prompted by the discovery that a partial loss of thrust after an engine failure during a required navigation performance authorization required (RNP- AR) approach under certain weight, altitude and temperature (WAT) conditions, may lead to a descent below the specified path guidance. This AD requ…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-100-1A10 airplanes. This AD was prompted by uncommanded horizontal stabilizer motion during several in- service events caused by a problem with the trim switch wiring. This AD requires installing the pitch/roll trim switch relays. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is superseding Airworthiness Directive (AD) 2021-10- 02, which applied to all Bombardier, Inc., Model BD-700-1A10 and BD- 700-1A11 airplanes. AD 2021-10-02 required repetitive general visual inspections of the left- and right-hand elevator torque tube bearings for any sand, dust, or corrosion; repetitive functional tests of the elevator control system; and replacement of the elevator torque tube bearings if…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-700-2A12 airplanes. This AD was prompted by reports that the pivot door pressure seals on the thrust reverser fixed structure were found disbonded or missing on several airplanes. This AD requires inspecting the pivot door pressure seals and accomplishing applicable corrective actions. This AD also requires a functional tes…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-700-1A10 and BD-700-1A11 airplanes. This AD was prompted by a determination that new or more restrictive airworthiness limitations for certain brake accumulators are necessary. This AD requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limita…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-700-1A10 and BD-700-1A11 airplanes. This AD was prompted by reports of missing or damaged inboard flap seal plate assemblies. This AD requires repetitive inspections for cracks of the attaching angles of the inboard flap seal plates and replacement. The FAA is issuing this AD to address the unsafe condition on these product…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Bombardier, Inc., Model BD-100-1A10 airplanes. This AD was prompted by a determination that new or more restrictive maintenance tasks are necessary. This AD requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive maintenance tasks. The FAA is issuing this AD to address the unsafe condition o…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-700-2A12 airplanes. This AD was prompted by reports that the baggage bay discharge push-button annunciator (PBA) switch was making contact but was not fully engaged, and the tabs were not fully locked. This AD requires a verification of the baggage bay discharge PBA functionality and tab installation. The FAA is issuing thi…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-700-2A12 airplanes. This AD was prompted by a report indicating that the fan in a transformer rectifier unit (TRU) can become inoperative in a manner that is not detectable by the fan monitoring circuit. This AD requires replacement of the existing TRU Number 2 with a new part number that incorporates a correction to the fa…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is superseding Airworthiness Directive (AD) 2023-11- 01, which applied to certain Bombardier, Inc., Model BD-100-1A10 airplanes. AD 2023-11-01 required a records check and replacement of affected left-hand (LH) direct current power center (DCPC) units. AD 2023-11-01 also provided optional terminating action for the records check and replacement. This AD was prompted by multiple reports of erratic electrical…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-100-1A10 airplanes. This AD was prompted by a determination that a revised restrictive airworthiness limitation is necessary. This AD requires revising the existing maintenance or inspection program, as applicable, to incorporate a revised restrictive airworthiness limitation for the aft engine mount attachment bolts. The F…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-100-1A10 airplanes. This AD was prompted by the discovery of a single-point failure within the left- hand and right-hand heater current monitor (HCM) units. This AD requires installing a monitor circuit comprising relays external to the HCM units. This AD also requires revising the normal and non-normal procedure sections o…
Airworthiness Directives; Bombardier, Inc. Airplanes
The FAA is superseding Airworthiness Directive (AD) 2009-25- 13, which applied to certain Bombardier, Inc., Model BD-100-1A10 (Challenger 300) airplanes. AD 2009-25-13 required the deactivation of the left-hand (LH) baggage bay heater mat. Since the FAA issued AD 2009-25-13, Bombardier developed a new design solution for the potential uncontrolled heating of the baggage bay sidewall heater mat. This AD retains the r…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-100-1A10 airplanes. This AD was prompted by a determination that new or more restrictive maintenance tasks are necessary. This AD requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive maintenance tasks. The FAA is issuing this AD to address the unsafe conditi…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model CL-600-2B16 (604 Variant) airplanes. This AD was prompted by a report of sparking due to damaged wire insulation in the fueling adapter. This AD requires inspecting the electrical wires attached to the airplane connector located behind the fuel scupper for damage, and all applicable related investigative and corrective actions…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-700-1A10 and BD-700-1A11 airplanes. This AD was prompted by the discovery that existing maintenance tasks do not detect the potential failure of the passenger door detent mechanism because there is no procedure for inspecting the passenger door locking mechanism. This AD requires revising the maintenance or inspection progr…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model CL-600-2B16 (604 Variant) airplanes. This AD was prompted by a report indicating that a new filter plate connector for the nose wheel steering (NWS) system electronic control module (ECM) does not meet certain certification requirements. This AD requires replacing all affected ECMs. This AD also prohibits the installation of a…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-700-2A12 airplanes. This AD was prompted by reports from the supplier that some overheat detection sensing elements of the bleed air leak detection system were manufactured with insufficient salt fill, which can result in an inability to detect hot bleed air leaks. This AD requires maintenance records verification, and if a…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-700-1A10 and BD-700-1A11 airplanes. This AD was prompted by reports that some overheat detection sensing elements of the bleed air leak detection system were manufactured with insufficient salt fill, which can result in an inability to detect hot bleed air leaks. This AD requires maintenance records verification, and if an…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is superseding Airworthiness Directive (AD) 2021-20- 13, which applied to certain Bombardier, Inc., Model CL-600-2B16 (604 Variant) airplanes. AD 2021-20-13 required repetitive lubrication and repetitive detailed visual inspections (DVI) and non-destructive test (NDT) inspections of the main landing gear (MLG) shock strut lower pins, and replacement if necessary. This AD continues to require the lubrication…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-700-1A10 and BD-700-1A11 airplanes. This AD was prompted by a determination that a certain nondestructive test (NDT) procedure associated with a certain airworthiness limitation for inspecting the inboard, mid, and outboard flap metallic end ribs does not contain all of the necessary instructions. This AD requires a revisio…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Bombardier, Inc., Model BD-100-1A10 airplanes. This AD was prompted by a report of a steering control unit (SCU) filter plate connector that does not meet the certification requirements for exposure of electronic components to high intensity radiated field environments, which could result in malfunction of the nose wheel steering (NWS) system. This AD re…
Airworthiness Directives; Bombardier, Inc. Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model CL-600-2B16 (604 Variant) airplanes. This AD was prompted by a determination that a combination of system faults and procedural actions will cause the ground spoilers to deploy in the air. This AD requires revising the existing airplane flight manual (AFM) to add revised procedures. The FAA is issuing this AD to address the un…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Bombardier, Inc., Model BD-100-1A10 airplanes. This AD was prompted by reports from the supplier that some overheat detection sensing elements of the bleed air leak detection system were manufactured with insufficient salt fill, which can result in an inability to detect hot bleed air leaks. This AD requires revising the existing airplane flight manual (…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-700-1A10 and BD-700-1A11 airplanes. This AD was prompted by reports that the nose wheel steering selector valve (SSV) can be slow to deactivate under low temperature conditions. This AD requires replacing the affected SSV with a re-designed SSV that has an improved response time. The FAA is issuing this AD to address the un…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model CL-600-2B16 (604 Variant) airplanes. This AD was prompted by sleeve loops on some passenger oxygen mask lanyards that had improper crimping and unsealed ends. This AD requires an inspection of the passenger oxygen mask lanyards and replacement of defective oxygen mask lanyards. This AD also prohibits the installation of affect…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model CL-600-2B16 (604 Variant) airplanes. This AD was prompted by reports from the supplier that sensing elements of the bleed air leak detection system were manufactured with insufficient salt fill, which can result in an inability to detect hot bleed air leaks. This AD requires testing of all affected overheat detection sensing e…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-100-1A10 airplanes. This AD was prompted by a design review of the avionic architecture of the pitch trim indication and alerting system that revealed software errors could generate misleading pitch trim indication to the crew, leading to incorrect horizontal stabilizer positioning at takeoff. This AD requires revising the…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-700-2A12 airplanes. This AD was prompted by a report that some of the multi-function spoiler (MFS) anti-rotation plates failed in-service due to a thin wall design. This AD requires replacing the MFS anti-rotation plates, inspecting the MFS anti-rotation plates for cracking and hinge bolts for evidence of rotation, accompli…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model CL-600-1A11 (600), CL-600-2A12 (601), and CL-600-2B16 (601-3A, 601-3R, and 604 Variants) airplanes. This AD was prompted by an uncommanded flap extension accompanied by a flaps fail caution message during climb. This AD requires initial and repetitive operational tests of the flap control system. The FAA is issuing this AD to…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Bombardier, Inc., Model BD-100-1A10 airplanes. This AD was prompted by an in-service event where the nose gear door amber caution message displayed on the crew alerting system during the initial climb after gear retraction. This AD requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airw…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is superseding Airworthiness Directive (AD) 2023-12- 20, which applied to certain Bombardier, Inc., Model CL-600-2B16 (604 Variant) airplanes. AD 2023-12-20 required replacing certain oxygen system hoses and prohibited installing affected oxygen hoses. Since the FAA issued AD 2023-12-20, the FAA has learned of an error in a required compliance time. This AD retains the requirements of AD 2023-12-20, with a r…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model CL-600-2B16 (604 Variant) airplanes. This AD was prompted by reports of oxygen leaks caused by cracked, brittle, or broken oxygen hoses that were found during scheduled maintenance tests of the airplane oxygen system. This AD requires replacing oxygen system hoses having any part number in the O2C20T1 and O2C20T14 series. This…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-100-1A10 airplanes. This AD was prompted by multiple reports of erratic electrical system status on the push button annunciators (PBAs) and the engine instrument and crew alerting system (EICAS) while on-ground and during flight. This AD requires a records check and replacement of affected left-hand (LH) direct current powe…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-100-1A10 airplanes. This AD was prompted by reports of unexpected pitch upset upon autopilot disconnect. This AD requires revising the Non-Normal Procedures section of the existing airplane flight manual (AFM) associated with Auto Flight. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is superseding Airworthiness Directive (AD) 2020-07- 13, which applied to certain Bombardier, Inc., Model BD-100-1A10 airplanes. AD 2020-07-13 required revising the existing airplane flight manual (AFM) to provide the flightcrew with new warnings for "Autoflight" and "Engine Failure in Climb During ALTS CAP." This AD requires revising the existing AFM to provide the flightcrew with new warnings for "Autoflig…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-700-1A10 and BD-700-1A11 airplanes. This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This AD requires revising the existing maintenance or inspection program, as applicable, to incorporate more restrictive airworthiness limitations. The FAA is issuing this AD to a…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is superseding Airworthiness Directive (AD) 2023-06- 13, which applied to all Bombardier, Inc., Model BD-700-2A12 airplanes. AD 2023-06-13 required revising the existing airplane flight manual (AFM) with new limitations to mitigate identified hazards due to interference from wireless broadband operations in the 3.7-3.98 GHz frequency band (5G C-Band) as identified by Notices to Air Missions (NOTAMs). Since t…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is superseding Airworthiness Directive (AD) 2023-03- 06, which applied to all Bombardier, Inc., Model BD-700-1A10 and BD- 700-1A11 airplanes. AD 2023-03-06 required revising the existing airplane flight manual (AFM) to incorporate limitations to mitigate identified hazards when in the presence of interference from wireless broadband operations in the 3.7-3.98 GHz frequency band (5G C-Band) as identified by N…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-100-1A10 airplanes. This AD was prompted by a report that a design deficiency was discovered which could allow a no-back pawl to be incorrectly installed in a horizontal stabilizer trim actuator (HSTA). This AD requires a check for part number and serial numbers of the HSTA, and if necessary, inspection of the no-back pawl…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-700-2A12 airplanes. This AD was prompted by a report that certain environmental control system (ECS) pre-cooler clamp assemblies may not conform to specifications. This AD requires an inspection of the pre-cooler clamps and replacement of non- conforming pre-cooler clamps. The FAA is issuing this AD to address the unsafe co…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-700-1A10 and BD-700-1A11 airplanes. This AD was prompted by a report that certain airplane flight manuals (AFMs) contain figures with incorrect performance charts for landing on contaminated runways. This AD requires revising the existing AFM to correct the affected performance charts. The FAA is issuing this AD to address…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model CL-600-2B16 (604 Variant) airplanes. This AD was prompted by a determination that during certain modes, the flight guidance/autopilot does not account for engine failure while capturing an altitude. This AD requires revising the existing airplane flight manual (AFM) to add new limitations and procedures. The FAA is issuing thi…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model CL-600-1A11 (600), CL-600-2A12 (601), and CL-600-2B16 (601-3A, 601-3R, and 604 Variants) airplanes. This AD was prompted by reports of some passenger oxygen mask dispensing units (MDUs) with lanyards that are too long to meet the proper length specifications of the airplane. This AD requires replacing the affected MDUs with un…
Airworthiness Directives; Bombardier, Inc. Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Bombardier, Inc., Model CL-600-1A11 (600), CL-600-2A12 (601), and CL- 600-2B16 (601-3A, 601-3R, and 604 Variants) airplanes. This AD was prompted by a determination that, due to a lack of flightcrew awareness, smoke hoods with a certain part number installed throughout the airplane could be mistaken for protective breathing equipment (PBE). This AD requi…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-700-1A10 and BD-700-1A11 airplanes. This AD was prompted by a report that in case of a flap, slat, or slat- flap failure in flight, resetting the slat flap control unit (SFCU) to clear the error using the airplane flight manual (AFM) could result in the stall protection computer (SPC) setting the low-speed cue to the most c…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Bombardier, Inc., Model BD-700-2A12 airplanes. This AD was prompted by the determination that radio altimeters cannot be relied upon to perform their intended function if they experience interference from wireless broadband operations in the 3.7-3.98 GHz frequency band (5G C- Band), and a recent determination that this interference can result in unavaila…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-700-2A12 airplanes. This AD was prompted by report that the passenger door functional test engineering requirements (FTERs) were not fully accomplished on several airplanes. This AD requires measuring the passenger door steps, passenger door gaps, and passenger door stops rigging, and re-adjusting the door if necessary. The…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-100-1A10 airplanes. This AD was prompted by reports of cracks found in the tailcone upper firewall where the auxiliary power unit (APU) muffler electrical bonding strap is attached. This AD requires a detailed visual inspection of the tailcone upper firewall for defects, rework by replacement of the APU electrical bonding s…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-700-2A12 airplanes. This AD was prompted by a report that certain fasteners attaching the fuselage skin to a certain stringer may be missing. This AD requires inspecting for missing fasteners and damage, including cracking, of the affected area, and repair or installation of fasteners if necessary. The FAA is issuing this A…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-700-2A12 airplanes. This AD was prompted by a report of a lateral offset observed on the head-up display (HUD) of several airplanes between the synthetic vision system (SVS) and actual runway due to mechanical misalignment of the HUD during manufacturing and assembly. This AD requires revising the existing airplane flight m…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Bombardier, Inc., Model BD-100-1A10 airplanes. This AD was prompted by an investigation that indicated that one of the springs in the pitch trim switch of the horizontal stabilizer had failed. The failure of the spring could result in the airplane pitching nose down when actually commanded nose up. This AD requires a verification of the serial numbers of…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Bombardier, Inc., Model BD-700-1A10 and BD-700-1A11 airplanes. This AD was prompted by the determination that radio altimeters cannot be relied upon to perform their intended function if they experience interference from wireless broadband operations in the 3.7-3.98 GHz frequency band (5G C-Band), and a recent determination that this interference can res…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-700-1A10 and BD-700-1A11 airplanes. This AD was prompted by reports that the thrust reverser correction factors presented in certain airplane flight manual (AFM) performance charts for landing on contaminated runways do not provide sufficient margin for stopping distances in certain conditions. This AD requires revising the…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model CL-600-2B16 (604 Variant) airplanes. This AD was prompted by a report that some airplanes were delivered without a portable protective breathing equipment (PBE) device located in the left-side forward wardrobe, flight deck, or passenger cabin area of the airplane. This AD requires visually inspecting the forward left side cabi…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-700-1A10 and BD-700-1A11 airplanes. This AD was prompted by reports of the passenger door failing to dampen during opening at regularly scheduled maintenance checks, causing the door to open more rapidly than normal. An investigation found that a contributing factor was erroneous aircraft maintenance manual (AMM) procedures…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-700-2A12 airplanes. This AD was prompted by the investigation of erroneous radio altimeter data that was displayed on an in-service airplane. It was revealed that certain radio altimeter coaxial cables used by the radio altimeter systems, in the aft fuselage equipment bay, were damaged. This AD requires replacing affected r…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-700-2A12 airplanes. This AD was prompted by a report that the flightcrew and passenger oxygen system's refill and capillary lines may have been contaminated by sealant and cotton fibers. This AD requires an inspection to determine the serial numbers of the oxygen cylinders installed and replacement of each affected oxygen c…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-700-2A12 airplanes. This AD was prompted by reports of insufficient clearance between the surrounding structure/skin of the aircraft and select bleed air ducts that supply the wing ice protection system (WIPS) in the rear fuselage. This AD requires inspecting the bleed air duct and surrounding structure for minimum clearanc…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model CL-600-1A11 (600), CL-600-2A12 (601), and CL-600-2B16 (601-3A, 601-3R, and 604 Variants) airplanes. This AD was prompted by a report that some rudder power control unit (PCU) load limiters were found in service with the crimping missing from the end cap; therefore, the pilot command from the load limiter might not transmit cor…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-700-2A12 airplanes. This AD was prompted by reports that significant water accumulation was discovered in the oxygen service compartment access panels of multiple airplanes. This AD requires modifying the oxygen service compartment door to introduce a means of water drainage. The FAA is issuing this AD to address the unsafe…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-700-2A12 airplanes. This AD was prompted by a determination that the baggage bay line fire extinguishing tube assembly might not have been installed with the correct torque. This AD requires re-torqueing the baggage bay line fire extinguishing tube assembly to the correct torque values, and applying corrosion inhibiting com…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model CL-600-1A11 (600), CL-600-2A12 (601), and CL-600-2B16 (601-3A and 601-3R Variants) airplanes. This AD was prompted by reports that during certain operating modes, the flight guidance/autopilot does not account for engine failure while capturing an altitude. This AD requires revising the existing airplane flight manual (AFM) to…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Bombardier, Inc., Model BD-700-1A10 and BD-700-1A11 airplanes. This AD was prompted by reports that some oxygen box assemblies had their piston ejected during the mask deployment test. This AD requires a one- time inspection of each passenger oxygen box dual manifold assembly to find and replace affected parts. This AD also prohibits installing affected…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-700-1A10 and BD-700-1A11 airplanes. This AD was prompted by reports of the loss of all air data system information provided to the flightcrew during flight; the air data system information was recovered as the airplane descended to lower altitudes. This AD requires revising the existing airplane flight manual (AFM) to updat…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-700-1A10 and BD-700-1A11 airplanes. This AD was prompted by reports of internal corrosion on the inboard flaps found prior to regularly scheduled maintenance checks. This AD requires revising the existing maintenance or inspection program, as applicable, to incorporate a certain aircraft maintenance manual (AMM) task. The F…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-700-1A10 and BD-700-1A11 airplanes. This AD was prompted by reports of oxygen leaks caused by cracked, brittle, or broken oxygen hoses that were found during scheduled maintenance tests of the airplane oxygen system. This AD requires an inspection of the oxygen hose assembly to determine if an affected part number is instal…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model CL-600-1A11 (600), CL-600-2A12 (601), and CL-600-2B16 (601-3A, 601-3R, and 604 Variants) airplanes. This AD was prompted by a report of a wing stall (wing drop/un-commanded roll) during a landing flare. This AD requires revising the existing airplane flight manual (AFM) to incorporate a limitation and procedure for the wing an…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Bombardier, Inc., Model BD-100-1A10 airplanes. This AD was prompted by a report of multiple in-service events where, following a STAB TRIM FAULT advisory message and auto-pilot disconnect, flightcrew commands for a nose-up trim resulted in nose-down trim movement of the horizontal stabilizer instead. This AD requires revising the existing airplane flight…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-100-1A10 airplanes. This AD was prompted by a report that the nose wheel steering selector valve (SSV) can be slow to deactivate under low temperature conditions. This AD requires replacing the affected nose wheel SSV with a redesigned nose wheel SSV, and performing an operational test of the nose wheel SSV and nose wheel s…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model CL-600-1A11 (600), CL-600-2A12 (601), and CL-600-2B16 (601-3A, 601-3R, and 604 Variants) airplanes. This AD was prompted by a report of smoke in the aft cabin during a maintenance activity, which an investigation determined was caused by a faulty drain line ribbon heater. This AD requires a general visual inspection of all aff…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Bombardier, Inc., Model BD-100-1A10 airplanes. This AD was prompted by a report that the design of the spoiler control system causes certain engine indication and crew alerting system (EICAS) messages to be posted intermittently and repetitively during flight and on the ground, and flightcrews must action the appropriate checklist each time these message…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is superseding Airworthiness Directive (AD) 2017-22- 06, which applied to certain Bombardier, Inc., Model CL-600-2B16 (601- 3A, 601-3R, and 604 Variants) airplanes. AD 2017-22-06 required repetitive inspections for fuel leakage at the engine and auxiliary power unit (APU) fuel pumps, and related investigative and corrective actions if necessary. This AD retains the requirements of AD 2017-22- 06, and require…
Airworthiness Directives; Bombardier, Inc. Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model CL-600-1A11 (600), CL-600-2A12 (601), and CL-600-2B16 (601-3A, 601-3R, and 604 Variants) airplanes. This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This AD requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more re…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-100-1A10 airplanes. This AD was prompted by a discovery that a lockwire may not have been installed on the side stay actuator pin nut of the main landing gear (MLG). This AD requires inspecting the left-hand and right-hand MLG side stay actuator assembly pin nut for the presence of a lockwire, and installing a lockwire if n…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-100-1A10 airplanes. This AD was prompted by reports of erratic electrical system status on the push button annunciators (PBAs) and the engine instrument and crew alerting system (EICAS). This AD requires revising the existing airplane flight manual (AFM) to incorporate procedures to be applied during erroneous electrical st…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-700-1A10 and BD-700-1A11 airplanes. This AD was prompted by reports that the sliding bushings in the forward engine mount system were missing. This AD requires an inspection (gap check) of the front and aft engine mounts to verify the proper installation of the sliding bushings, and repair if necessary. The FAA is issuing t…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model CL-600-2B16 (604 Variant) airplanes. This AD was prompted by multiple reports of cracking of the main landing gear (MLG) shock strut lower pin. This AD requires repetitive lubrication and repetitive detailed visual inspections (DVI) and non- destructive test (NDT) inspections of the MLG shock strut lower pins, and replacement…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Bombardier, Inc., Model CL-600-1A11 (600), CL-600-2A12 (601), and CL- 600-2B16 (601-3A, 601-3R and 604 Variants) airplanes. This AD was prompted by reports of corrosion on the passenger door internal structure of in-service airplanes. This AD requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restr…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-100-1A10 airplanes. This AD was prompted by a report that certain airplanes have navigation units with outdated magnetic variation (MagVar) tables. This AD requires revising the existing airplane flight manual (AFM) and applicable corresponding operational procedures to update the flight management system (FMS) limitations.…
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Bombardier, Inc., Model BD-700-1A10 and BD-700-1A11 airplanes. This AD was prompted by reports indicating that the left- and right-hand elevator torque tube bearings were contaminated with sand and corrosion, restricting free rotation. This AD requires repetitive general visual inspections of the left- and right-hand elevator torque tube bearings for any…