Cfm international s.a. turbofan airworthiness directives
17 ADs in the reference matching Cfm international s.a. turbofan — from the Federal Register, checked every weekday. Applicability may depend on serial and effectivity: verify against the official AD before any maintenance action.
Reference last synced: 10/26/2026 17:00 UTC · 10,463 ADs indexed
Airworthiness Directives; CFM International S.A. Turbofan Engines
The FAA is adopting a new airworthiness directive (AD) for certain CFM International S.A. (CFM) CFM56-5B, CFM56-5C, and CFM56-7B model turbofan engines with a certain rotating air high-pressure turbine (HPT) front seal. This AD requires replacement of the affected rotating air HPT front seal with a part eligible for installation. This AD was prompted by cracks found in the rotating air HPT front seal. The FAA is iss…
Airworthiness Directives; CFM International S.A. Turbofan Engines
The FAA is adopting a new airworthiness directive (AD) for certain CFM International S.A. (CFM) LEAP-1B21, -1B23, -1B25, -1B27, - 1B28, -1B28B1, -1B28B2, -1B28B3, -1B28B2C, -1B28BBJ1, and -1B28BBJ2 model turbofan engines. This AD requires initial and repetitive inspections of the transfer gearbox (TGB) scavenge screens and, depending on the results of the inspection, possible removal of the engine from service. This…
Airworthiness Directives; CFM International S.A. Turbofan Engines
We are superseding Airworthiness Directive (AD) 2018-18-01 for all CFM International S.A. (CFM) Model CFM56-7B turbofan engines. AD 2018-18-01 required initial and repetitive inspections of certain fan blades and, if they fail the inspection, their replacement with parts eligible for installation. This AD requires the same initial and repetitive inspections but revises the compliance time for the initial inspections…
Airworthiness Directives; CFM International S.A. Turbofan Engines
We are adopting a new airworthiness directive (AD) for all CFM International S.A. (CFM) LEAP-1B21, -1B23, -1B25, -1B27, -1B28, - 1B28B1, -1B28B2, -1B28B2C, -1B28B3, -1B28BBJ1, and -1B28BBJ2 turbofan engines. This AD requires removing certain electronic engine control (EEC) system operation (OPS) and engine health monitoring (EHM) software and installing versions eligible for installation. This AD was prompted by six…
Airworthiness Directives; CFM International S.A. Turbofan Engines
We are adopting a new airworthiness directive (AD) for all CFM International S.A. (CFM) LEAP-1B21, LEAP-1B23, LEAP-1B25, LEAP-1B27, LEAP-1B28, LEAP-1B28B1, LEAP-1B28B2, LEAP-1B28B2C, LEAP-1B28B3, LEAP- 1B28BBJ1, and LEAP-1B28BBJ2 turbofan engines with a certain high- pressure turbine (HPT) stator case (HPT cases) installed. This AD requires removal of affected HPT cases from service and their replacement with a part…
Airworthiness Directives; CFM International S.A. Turbofan Engines
We are adopting a new airworthiness directive (AD) for all CFM International S.A. (CFM) LEAP-1A23, -1A24, -1A24E1, -1A26, -1A26E1, - 1A26CJ, -1A29, -1A29CJ, -1A30, -1A32, -1A33, -1A33B2, and -1A35A turbofan engines with certain full authority digital engine control (FADEC) and prognostic health monitoring (PHM) software installed. This AD requires removing certain FADEC and PHM software and installing versions eligi…
Airworthiness Directives; CFM International S.A. Turbofan Engines
The FAA is superseding Airworthiness Directive (AD) 2018-10-11 for all CFM International S.A. (CFM) Model CFM56-7B engines. AD 2018- 10-11 required initial and repetitive inspections of certain fan blades and, if they fail the inspection, their replacement with parts eligible for installation. This superseding AD requires the same initial and repetitive inspections but revises the compliance time for the repetitive…
Airworthiness Directives; CFM International S.A. Turbofan Engines
We are adopting a new airworthiness directive (AD) for CFM International, S.A., (CFM) CFM56-7B model engines. This emergency AD was sent previously to all known U.S. owners and operators of CFM CFM56-7B model engines. This AD requires a one-time ultrasonic inspection (USI) of the concave and convex sides of the fan blade dovetail. This AD was prompted by a recent engine failure due to a fractured fan blade, which re…
Airworthiness Directives; CFM International S.A. Turbofan Engines
We are superseding Airworthiness Directive (AD) 2018-09-10 for all CFM International S.A. (CFM) Model CFM56-7B engines. AD 2018-09-10 required initial and repetitive inspections of the concave and convex sides of the fan blade dovetail to detect cracking and replacement of any blades found cracked. This AD requires the same initial and repetitive inspections but revises the compliance time for the initial inspection…
Airworthiness Directives; CFM International S.A. Turbofan Engines
We are adopting a new airworthiness directive (AD) for all CFM International S.A. (CFM) Model CFM56-7B engines. This AD requires initial and repetitive inspections of the concave and convex sides of the fan blade dovetail to detect cracking and replacement of any blades found cracked. This AD was prompted by a recent engine failure due to a fractured fan blade, that resulted in the engine inlet cowl disintegrating a…
Airworthiness Directives; CFM International S.A. Turbofan Engines
We are adopting a new airworthiness directive (AD) for certain CFM International S.A. (CFM) LEAP-1A turbofan engines. This AD requires removal, inspection, rework, and re-identification of the high-pressure turbine (HPT) stage 2 disk, part number (P/N) 2466M52G03. This AD was prompted by a quality escape at the manufacturer that resulted in cracks appearing during forging of the HPT stage 2 disks. We are issuing thi…
Airworthiness Directives; CFM International S.A. Turbofan Engines
We are adopting a new airworthiness directive (AD) for certain CFM International S.A. (CFM) CFM56-3, -3B, and -3C turbofan engines. This AD was prompted by a report of dual-engine loss of thrust control (LOTC) that resulted in an air turn back. This AD requires initial and repetitive checks of the variable stator vane (VSV) actuation system in the high-pressure compressor (HPC). We are issuing this AD to address the…
Airworthiness Directives; CFM International S.A. Turbofan Engines
We are adopting a new airworthiness directive (AD) for certain CFM International S.A. (CFM) CFM56-5 turbofan engines. This AD requires removal of the radial drive shaft (RDS) assembly and the RDS outer housing and their replacement with parts eligible for installation. This AD was prompted by reports of the failure of the RDS on CFM CFM56- 5B engines. We are issuing this AD to correct the unsafe condition on these p…
Airworthiness Directives; CFM International S.A. Turbofan Engines
We are adopting a new airworthiness directive (AD) for certain CFM International S.A. (CFM) CFM56-5B series turbofan engines. This AD was prompted by a corrected lifing analysis by the engine manufacturer that shows the need to identify an initial and repetitive inspection threshold for certain part number (P/N) turbine rear frames (TRFs). This AD requires initial and repetitive inspections of certain P/N TRFs on th…
Airworthiness Directives; CFM International S.A. Turbofan Engines
We are adopting a new airworthiness directive (AD) for certain CFM International S.A. (CFM) CFM56-7B and CFM56-3 turbofan engines. This AD was prompted by a report of an uncommanded in-flight shutdown (IFSD) on a CFM CFM56-7B engine following rupture of the 73-tooth gearshaft located in the engine accessory gearbox (AGB). This AD requires AGB/transfer gearbox (TGB) magnetic chip detector (MCD) inspection of the affe…
Airworthiness Directives; CFM International S.A. Turbofan Engines
We are adopting a new airworthiness directive (AD) for all CFM International S.A. (CFM) CFM56-7B series turbofan engines. This AD was prompted by a dual engine thrust instability event that resulted in the overspeed and in-flight shutdown (IFSD) of one engine. This AD requires modification of the engine by removing full authority digital engine control (FADEC) software, version 7.B.V4 or earlier, installed in the el…
Airworthiness Directives; CFM International S.A. Turbofan Engines
We are adopting a new airworthiness directive (AD) for all CFM International (CFM) S.A. CFM56-3 and CFM56-7B series turbofan engines with certain accessory gearboxes (AGBs) not equipped with a handcranking pad "oil dynamic seal" assembly. This AD was prompted by 42 events of total loss of engine oil from CFM56 series turbofan engines while in flight. This AD requires an independent inspection to verify re-installati…