Bell helicopter textron airworthiness directives
54 ADs in the reference matching Bell helicopter textron — from the Federal Register, checked every weekday. Applicability may depend on serial and effectivity: verify against the official AD before any maintenance action.
Reference last synced: 10/26/2026 05:00 UTC · 10,463 ADs indexed
Airworthiness Directives; Bell Helicopter Textron Inc. Helicopters
The FAA is superseding Airworthiness Directive (AD) 2015-04-04 for Bell Helicopter Textron Inc. (Bell) Model 412 and 412EP helicopters. AD 2015-04-04 required revising the Rotorcraft Flight Manual (RFM) for your helicopter and installing a placard to limit flights to visual flight rules (VFR) and prohibit night operations because of failing inverters. This AD requires replacing the affected inverter with a new inver…
Airworthiness Directives; Bell Helicopter Textron, Inc. (Bell) Helicopters
We are superseding Airworthiness Directive (AD) 2018-17-01 for Bell Model 212, 412, 412CF, and 412EP helicopters. AD 2018-17-01 required replacing certain oil and fuel check valves and prohibited installing these valves on any helicopter. This AD retains the requirements of AD 2018-17-01 but expands those requirements for all model helicopters. This AD was prompted by the discovery that we omitted a helicopter model…
Airworthiness Directives; Bell Helicopter Textron Inc., Helicopters
We are adopting a new airworthiness directive (AD) for Bell Helicopter Textron Inc. (Bell) Model 212, Model 412, and Model 412EP helicopters. This AD requires replacing the emergency flotation system (EFS) tube assembly. This AD was prompted by a report of an EFS tube assembly failure. The actions of this AD are intended to address an unsafe condition on these products.
Airworthiness Directives; Bell Helicopter Textron, Inc. (Bell) Helicopters
We are superseding Airworthiness Directive (AD) 2017-15-02 for Bell Model 212 and 412 helicopters. AD 2017-15-02 required replacing certain oil and fuel check valves and prohibited installing them on any helicopter. This AD retains the requirements of AD 2017-15-02 and adds certain model helicopters to the applicability. This AD was prompted by the discovery of an error in the affected models. We are issuing this AD…
Airworthiness Directives; Bell Helicopter Textron Helicopters
We are adopting a new airworthiness directive (AD) for Bell Helicopter Textron (Bell) Model 204B, 205A, and 205A-1 helicopters with a Helicopter Technology Company (HTC) main rotor (M/R) blade installed. This AD requires cleaning and visually inspecting the M/R blades, and depending on the outcome of the inspection, repairing or replacing the M/R blades. This AD is prompted by a report of an M/R blade with a fatigue…
Airworthiness Directives; Bell Helicopter Textron, Inc. (Bell) Helicopters
We are adopting a new airworthiness directive (AD) for Bell Model 212 and Model 412 helicopters. This AD requires replacing certain oil and fuel check valves and prohibits installing them on any helicopter. This AD is prompted by a report of cracked or leaking check valves. These actions are intended to address an unsafe condition on these helicopters.
Airworthiness Directives; Bell Helicopter Textron
We are superseding Airworthiness Directive (AD) 75-26-05 for Bell Helicopter Textron (Bell) Model 204B, 205A-1 and 212 helicopters. AD 75-26-05 required removing and visually inspecting each main rotor (M/R) blade and, depending on the inspection's outcome, repairing or replacing the M/R blades. This new AD requires more frequent inspections of certain M/R blades and applies to Model 205A helicopters. This AD does n…
Airworthiness Directives; Bell Helicopter Textron Helicopters
We are adopting a new airworthiness directive (AD) for certain Bell Helicopter Textron (Bell) Model 430 helicopters. This AD requires establishing a life limit for a certain main rotor hub attachment bolt (bolt) and removing from service each bolt that has met or exceeded its life limit. This AD was prompted by a documentation error that omitted the life limit of a certain part-numbered bolt from the Airworthiness L…
Airworthiness Directives; Bell Helicopter Textron, Inc.
We are adopting a new airworthiness directive (AD) for certain Bell Helicopter Textron, Inc. (Bell), Model 204B, 205A, 205A-1, and 212 helicopters. This AD requires removing a certain part-numbered main rotor (M/R) blade grip (grip) from service. This AD is prompted by an error in a parts manufacturer approval (PMA) that incorrectly allows installation of the grips on the Bell Model 212. The actions specified in thi…
Airworthiness Directives; Bell Helicopter Textron Inc. Helicopters
We are adopting a new airworthiness directive (AD) for Bell Helicopter Textron Inc. (Bell) Model 412 and 412EP helicopters with certain static inverters (inverters) installed. This AD requires revising the Rotorcraft Flight Manual (RFM) and installing a placard in full view of the pilot to limit flight to visual flight rules (VFR) only and prohibit night operations. This AD is prompted by failures of certain inverte…
Airworthiness Directives; Bell Helicopter Textron, Inc. (Bell) Helicopters
We are superseding Airworthiness Directive (AD) 2013-11-05 for Bell Model 214B, 214B-1, and 214ST helicopters with certain tail rotor hanger bearings (bearing) installed. AD 2013-11-05 required inspecting the bearing to determine whether an incorrectly manufactured seal material is installed on the bearing. This new AD retains the repetitive inspection of the bearings and also requires replacing the defective bearin…
Airworthiness Directives; Bell Helicopter Textron, Inc. (Bell) Helicopters
We are adopting a new airworthiness directive (AD) for Bell Model 204B helicopters with a certain cable assembly installed. This AD requires inspecting the tail rotor (T/R) cable assembly for an incorrectly machined body. This AD is prompted by a report from Bell that a defective body on the cable prevents the barrel assembly from fully engaging in the body cavity. These actions are intended to prevent disengagement…
Airworthiness Directives; Bell Helicopter Textron, Inc., Helicopters
We are adopting a new airworthiness directive (AD) for Bell Helicopter Textron, Inc. (Bell), Model 206A, 206B, 206L, 206L-1, 206L- 3, 206L-4, and 407 helicopters with an Apical Industries, Inc. (Apical) emergency float kit installed under Supplemental Type Certificate (STC) Number SR01535LA. This AD was prompted by an incident in which the floats installed on a helicopter failed to deploy. This AD requires inspectin…
Airworthiness Directives; Bell Helicopter Textron, Inc. (Bell) Helicopters
We are superseding Airworthiness Directive (AD) 2009-05-09 for Bell Model 412, 412CF, and 412EP helicopters. AD 2009-05-09 required reidentifying each affected part-numbered main rotor yoke (yoke) on its data plate, reducing the retirement life of the reidentified yoke, and revising the Airworthiness Limitations section of the maintenance manual or the Instructions for Continued Airworthiness (ICAs) accordingly. Thi…
Airworthiness Directives; Bell Helicopter Textron Helicopters
We are superseding Airworthiness Directive (AD) 2008-10-03 for Bell Helicopter Textron Helicopters (Bell) Model 204B, 205A, 205A-1, 205B, 210, 212, 412, 412CF, and 412EP helicopters. AD 2008-10-03 required certain checks and inspections of each tail rotor blade assembly (T/R blade) at specified intervals and repairing or replacing, as applicable, any cracked or damaged T/R blade. Since we issued AD 2008-10-03, an ac…
Airworthiness Directives; Bell Helicopter Textron, Inc. (Bell) Helicopters
We are adopting a new airworthiness directive (AD) for Bell Model 214B, 214B-1, and 214ST helicopters with a certain tail rotor hanger bearing (bearing) installed. This AD requires inspecting the bearing to determine whether an incorrectly manufactured seal material is installed on the bearing. This AD is prompted by a report that certain bearings were manufactured with an incorrect seal material that does not meet…
Airworthiness Directives; Bell Helicopter Textron, Inc.
We are adopting a new airworthiness directive (AD) for Bell Helicopter Textron, Inc. (Bell), Model 412 and 412EP helicopters. This AD requires establishing a lower life limit on certain swashplate outer ring assemblies (outer ring), revising the retirement life on the components' history card or equivalent record, and revising the maintenance manual or Instructions for Continued Airworthiness (ICA). This AD also pro…
Airworthiness Directives; Bell Helicopter Textron Helicopters
We are superseding an existing airworthiness directive (AD) for the Bell Helicopter Textron (Bell) Model 212 helicopters and adopting requirements for Bell Model 204B, 205A, 205A-1, 205B and 210 helicopters with certain part-numbered main rotor hub inboard strap fittings (fittings). This AD requires magnetic particle inspecting (MPI) the fittings for a crack, and if a crack exists, replacing the fittings with airwor…
Airworthiness Directives; Bell Helicopter Textron, Inc. (Bell) Helicopters
We are superseding four airworthiness directives related to the main rotor yoke (yoke) on the Bell Model 204B, 205A, 205A-1, 205B, and 212 helicopters, to retain certain inspections and certain life limits, to require an increased inspection frequency for certain yokes, and to expand these inspections and retirement lives to other yokes. This airworthiness directive is prompted by past reports of cracks in the yoke,…
Airworthiness Directives; Bell Helicopter Textron Inc. Helicopters
We are adopting a new airworthiness directive (AD) for the Bell Helicopter Textron Inc. (BHTI) Model 205A, 205A-1, and 205B helicopters with certain starter/generator power cable assemblies (power cable assemblies). This AD requires replacing the power cable assemblies and their associated parts, and performing continuity readings. This AD was prompted by the determination that the power cable assembly connector (co…
Airworthiness Directives; Bell Helicopter Textron Helicopters
We are adopting a new airworthiness directive (AD) for Bell Helicopter Textron (BHT) Model 412, 412EP, and 412CF helicopters. This AD requires a repetitive inspection of the collective lever for a crack, and if there is a crack, before further flight, replacing the collective lever with an airworthy collective lever. This AD was prompted by a reported failure of a collective lever. The actions are intended to detect…
Airworthiness Directives; Bell Helicopter Textron, Inc. (Bell), Model 205A-1, 205B, 210, and 212 Helicopters
This amendment supersedes an existing airworthiness directive (AD) for Bell Model 205B and 212 helicopters with certain main rotor blade (blade) assemblies installed. That AD currently requires washing the upper and lower surfaces of each blade and visually inspecting the grip plates, doublers, and the remaining upper and lower surfaces of the blades in the area between blade stations 24.5 to 40 for an edge void, co…
Airworthiness Directives; Bell Helicopter Textron, Inc. Model 204B, 205A, 205A-1, 205B, 210, 212, 412, 412CF, 412EP Helicopters
We are publishing in the Federal Register an amendment which was sent previously to all known U.S. owners and operators that supersedes an existing airworthiness directive (AD) for the specified Bell Helicopter Textron, Inc. (BHT) Model helicopters with certain tail rotor blades (blades). The superseded AD requires, before further flight, replacing certain blades with airworthy blades. This AD retains the requiremen…
Airworthiness Directives; Bell Helicopter Textron, Inc. Model 205A, 205A-1, 205B, 212, 412, 412CF, and 412EP Helicopters
This amendment adopts a new airworthiness directive (AD) for the specified Bell Helicopter Textron, Inc. (BHT) model helicopters with tail rotor (T[sol]R) blades with certain serial numbers installed. This action requires a one-time inspection of the T[sol]R blade for corrosion or pitting, and repairing or replacing the T[sol]R blade, if that condition is found during the inspection. This amendment is prompted by a…
Airworthiness Directives; Bell Helicopter Textron, Inc. Model 212 Helicopters
We are superseding an existing emergency airworthiness directive (EAD) for the Bell Helicopter Textron, Inc. (Bell) Model 212 helicopters with a certain main rotor hub inboard strap fitting (fitting) installed. That EAD requires, before further flight, removing certain serial-numbered fittings and replacing them with airworthy fittings. It also requires performing a magnetic particle inspection (MPI) on fittings wit…
Airworthiness Directives; Bell Helicopter Textron (Bell) Model 205A, 205A-1, 205B, 212, 412, 412EP, and 412CF and Agusta S.p.A. (Agusta) Model AB412, AB412EP Helicopters
This amendment adopts a new airworthiness directive (AD) for the Aeronautical Accessories, Inc. (AAI) Low Skid Landing Gear Forward Crosstube (Crosstube) on certain Bell and Agusta model helicopters. This action requires replacing certain AAI serial-numbered crosstubes installed on these model helicopters. This amendment is prompted by the discovery of a defect in the raw material used in manufacturing certain cross…
Airworthiness Directives; Bell Helicopter Textron, Inc. Model 205B and 212 Helicopters
This amendment adopts a new airworthiness directive (AD) for Bell Helicopter Textron, Inc. (Bell) Model 205B and 212 helicopters with certain main rotor (M/R) blade assemblies installed. This action requires inspecting the M/R blades paying particular attention to an area near the blade root for an edge void, corrosion, or a crack. This amendment is prompted by two reports of fatigue cracks on M/R blades installed o…
Airworthiness Directives; Bell Helicopter Textron, Inc. Model 47, 47B, 47B3, 47D, 47D1, 47E, 47G, 47G-2, 47G-2A, 47G-2A-1, 47G-3, 47G-3B, 47G-3B-1, 47G-3B-2, 47G-3B-2A, 47G-4, 47G-4A, 47G-5, 47G-5A, 47H-1, 47J, 47J-2, 47J-2A, and 47K Helicopters
This amendment adopts a new airworthiness directive (AD) for the specified Bell Helicopter Textron, Inc. (Bell) helicopters. This action requires visually inspecting each main rotor blade box beam clip (clip) for correct installation. This amendment is prompted by a report of a main rotor blade with an incorrectly installed clip. The actions specified in this AD are intended to prevent a main rotor blade spar crack…
Airworthiness Directives; Bell Helicopter Textron Inc. Model 412, 412CF, and 412EP Helicopters
This amendment adopts a new airworthiness directive (AD) for the specified Bell Helicopter Textron Inc. (Bell) model helicopters. This action requires reidentifying a certain part-numbered main rotor yoke (yoke) based on whether it was ever installed on a Model 412CF helicopter or on a Model 412 or 412EP helicopter with a slope landing kit. This AD also requires reducing the retirement life of the reidentified yokes…
Airworthiness Directives; Bell Helicopter Textron Model 204B, 205A, 205A-1, 205B, 210, 212, 412, 412CF, and 412EP Helicopters
This amendment adopts a new airworthiness directive (AD) for the specified Bell Helicopter Textron (Bell) model helicopters. This action requires certain checks and inspections of each tail rotor blade assembly (T/R blade) at specified intervals and repairing or replacing, as applicable, any unairworthy T/R blade. This amendment is prompted by three failures of a T/R blade occurring during flight and a recent incide…
Airworthiness Directives; Bell Helicopter Textron, Inc. Model 204B, 205A, 205A-1, 205B, 210, 212, 412, 412EP, and 412CF Helicopters
This document publishes in the Federal Register an amendment adopting Airworthiness Directive (AD) 2007-19-53, which was sent previously to all known U.S. owners and operators of the specified Bell Helicopter Textron, Inc. (BHTI) model helicopters by individual letters. This AD requires replacing each affected tail rotor blade (blade) with an airworthy blade with a serial number not listed in the applicability of th…
Airworthiness Directives; Bell Helicopter Textron, Inc. Model 205A, 205A-1, 205B, 212, 412, 412CF, and 412EP Helicopters
This amendment supersedes an existing airworthiness directive (AD) for the specified Bell Helicopter Textron, Inc. (Bell) Helicopters. That AD currently requires inspecting each affected tail rotor blade (blade) forward tip weight retention block (tip block) and the aft tip closure (tip closure) for adhesive bond voids, and removing any blade with an excessive void from service. That AD also requires modifying certa…
Airworthiness Directives; Bell Helicopter Textron Model 47D1, 47G, 47G-2, 47G-2A, 47G-2A-1, 47G-3, 47G-3B, 47G-3B-1, 47G-3B-2, 47G-3B-2A, 47G-4, 47G-4A, 47G-5, 47G-5A and Coastal Helicopters, Inc. Model OH-13H (Tomcat Mark 5A, 6B, 6C) Helicopters
This amendment adopts a new airworthiness directive (AD) for Bell Helicopter Textron (Bell) Model 47D1, 47G, 47G-2, 47G-2A, 47G-2A- 1, 47G-3, 47G-3B, 47G-3B-1, 47G-3B-2, 47G-3B-2A, 47G-4, 47G-4A, 47G-5, 47G-5A and Coastal Helicopters, Inc. Model OH-13H (Tomcat Mark 5A, 6B, 6C) helicopters that have a certain scissors assembly or weld assembly scissors bracket installed. The AD requires, within 60 days, determining a…
Airworthiness Directives; Bell Helicopter Textron Model 212, 412, and 412EP Helicopters
This amendment adopts a new airworthiness directive (AD) for the specified Bell Helicopter Textron (Bell) model helicopters modified with Aeronautical Accessories, Inc. (AAI), Supplemental Type Certificate (STC) SH2820SO or that have the affected AAI Parts Manufacturer Approval (PMA) parts installed. This action requires inspecting a certain part-numbered reservoir assembly adapter (adapter) for the counter bore dep…
Airworthiness Directives; Bell Helicopter Textron Model 206A and 206B Helicopters
This amendment adopts a new airworthiness directive (AD) for Bell Helicopter Textron (Bell) Model 206A and 206B helicopters modified by Aeronautical Accessories, Inc. Supplemental Type Certificate (STC) SH1392SO with certain part-numbered high crosstubes. This amendment requires inspecting at specified time intervals and replacing any cracked crosstubes. This amendment is prompted by the discovery of a cracked high…
Airworthiness Directives; Bell Helicopter Textron, Inc. Model 204B, 205A, 205A-1, 205B and 212 Helicopters
This amendment adopts a new airworthiness directive (AD) for the specified Bell Helicopter Textron Inc. (BHTI) model helicopters. This action requires conducting various inspections associated with the main rotor grip (grip). If a crack is found, this AD requires replacing the grip before further flight. If delamination of the buffer pad on the grip tang inner surface is found, this AD requires inspecting the grip s…
Airworthiness Directives; Bell Helicopter Textron, Inc. Model 204B, 205A, 205A-1, 205B, 212, 214B, and 214B-1 Helicopters
This amendment supersedes an existing airworthiness directive (AD) for specified Bell Helicopter Textron, Inc. (BHTI) model helicopters that requires reducing the retirement time for certain main rotor tension-torsion (TT) straps on those models and on the Model UH-1 series helicopters. This document contains the same requirements as the existing AD but removes the Model UH-1 series restricted category helicopters a…
Airworthiness Directives; Bell Helicopter Textron, A Division of Textron Canada Model 222, 222B, 222U, 230, and 430 Helicopters
This amendment adopts a new airworthiness directive (AD) for the specified Bell Helicopter Textron, A Division of Textron Canada (BHTC), model helicopters that requires removing sealant from the forward tooling hole in the right-hand upper fuel enclosure area. This amendment is prompted by the determination that fuel or water could accumulate in the right-hand upper fuel enclosure. The actions specified by this AD a…
Airworthiness Directives; Bell Helicopter Textron, Inc. Model 212 Helicopters
This amendment supersedes an existing airworthiness directive (AD) for Bell Helicopter Textron, Inc. (BHTI) Model 212 helicopters that currently requires, at specified intervals, inspecting for a cracked tail boom and replacing any cracked tail boom. That AD also requires modifying the tail fin and tail boom within 100 hours time-in- service (TIS). This amendment requires modifying and visually inspecting certain ve…
Airworthiness Directives; Bell Helicopter Textron, a Division of Textron Canada, Model 407 Helicopters
This amendment adopts a new airworthiness directive (AD) for Bell Helicopter Textron, A Division of Textron Canada (BHT), Model 407 helicopters. This action requires a fuel filler cap assembly shimming and electrical bonding procedure. This amendment is prompted by the FAA's determination, based on information from the manufacturer, that electrical bonding may be inadequate. The actions specified in this AD are inte…
Airworthiness Directives; Bell Helicopter Textron, Inc. Model 204B, 205A, A-1, and B Helicopters
This document publishes in the Federal Register an amendment adopting Emergency Airworthiness Directive (EAD) 2002-09-51, sent previously to all known U.S. owners and operators of specified Bell Helicopter Textron, Inc. (Bell) model helicopters by individual letters. This AD requires cleaning and inspecting the tail rotor (T/R) grip to determine if the grip is made of steel and replacing any grip not made of steel w…
Airworthiness Directives; Bell Helicopter Textron, Inc. Model 205A, 205A-1, 205B, 212, 412, 412EP, and 412CF Helicopters
This amendment adopts a new airworthiness directive (AD) for Bell Helicopter Textron, Inc. (BHTI) Model 205A, 205A-1, 205B, 212, 412, 412EP, and 412CF helicopters, that requires inspecting each affected tail rotor blade forward tip weight retention block (tip block) and the aft tip closure (tip closure) for adhesive bond voids, and removing any tail rotor blade with an excessive void from service. This AD also requi…
Airworthiness Directives; Bell Helicopter Textron, Inc.-Manufactured Model OH-13E, OH-13H, and OH-13S Helicopters
This amendment supersedes an existing airworthiness directive (AD) for Model OH-13E, OH-13H, and OH-13S helicopters manufactured by Bell Helicopter Textron, Inc. (BHTI). That AD currently requires either recurring liquid penetrant or eddy current inspections of the main rotor blade grip (grip) threads for a crack. If a crack is detected, that AD requires, before further flight, replacing the cracked grip with an air…
Airworthiness Directives; Bell Helicopter Textron, Inc. Model 47B, 47B-3, 47D, 47D-1, 47G, 47G-2, 47G2A, 47G-2A-1, 47G-3, 47G-3B, 47G-3B-1, 47G-3B-2, 47G-3B-2A, 47G-4, 47G-4A, 47G-5, 47G-5A, 47H-1, 47J, 47J-2, 47J-2A, and 47K Helicopters
This amendment supersedes an existing airworthiness directive (AD) that applies to Bell Helicopter Textron, Inc. (BHTI) Model 47B, 47B-3, 47D, 47D-1, 47G, 47G-2, 47G2A, 47G-2A-1, 47G-3, 47G-3B, 47G-3B- 1, 47G-3B-2, 47G-3B-2A, 47G-4, 47G-4A, 47G-5, 47G-5A, 47H-1, 47J, 47J- 2, 47J-2A, and 47K helicopters. That AD currently requires either recurring liquid penetrant or eddy current inspections of the main rotor blade g…
Airworthiness Directives; Bell Helicopter Textron, Inc. Model 205A-1, 205B, 212, 412, 412EP, and 412CF Helicopters
This amendment adopts a new airworthiness directive (AD), for Bell Helicopter Textron, Inc. (BHTI) Model 205A-1, 205B, 212, 412, 412EP, and 412CF helicopters. This AD requires removing each existing tail rotor counterweight bellcrank (bellcrank) retention nut (retention nut), replacing each retention nut with a zero hours time-in-service (TIS) retention nut; and follow-up inspections of installed retention nuts. Thi…
Airworthiness Directives; Bell Helicopter Textron, Inc. Model 412 Helicopters and Agusta S.p.A. Model AB412 Helicopters
This amendment supersedes an existing airworthiness directive (AD) that applies to certain serial-numbered Bell Helicopter Textron, Inc. (Bell) Model 412 helicopters and Agusta S.p.A. (Agusta) Model AB412 helicopters. That AD currently requires a temporary reduction of the never-exceed velocity (Vne) limitation until an inspection of the tail rotor yoke (yoke) assembly for fatigue damage and installation of a redesi…
Airworthiness Directives; Bell Helicopter Textron Inc. Model 205A-1, 205B, 212, 412, 412CF, and 412EP Helicopters
This amendment supersedes an existing airworthiness directive (AD) for Bell Helicopter Textron Inc. (BHTI) Model 205A-1, 205B, 212, 412, and 412CF helicopters. That AD currently requires inspecting the locking washer on each main rotor actuator (actuator) for twisting or damage to the tab and replacing any locking washer that has a twisted or damaged tab. Replacing certain locking washers, regardless of condition, i…
Airworthiness Directives; Bell Helicopter Textron, Inc. Model 214B and 214B-1 Helicopters
This amendment adopts a new airworthiness directive (AD) for Bell Helicopter Textron, Inc. (BHTI) Model 214B and 214B-1 helicopters. This action requires, within 10 hours time-in-service (TIS), determining the hours TIS for certain main rotor outboard strap fitting assemblies and creating appropriate records. This action also requires, if any main rotor outboard strap fitting assembly (strap fitting) is determined t…
Airworthiness Directives; Bell Helicopter Textron, Inc. Model 204B Helicopters
This amendment adopts a new airworthiness directive (AD) for Bell Helicopter Textron, Inc. (BHTI) Model 204B helicopters that requires replacing any main rotor mast assembly (mast), part number (P/ N) 204-011-450-001, within 25 hours time-in-service (TIS). This amendment is prompted by the crash of a restricted category Model UH-1B helicopter due to failure of a mast, P/N 204-011-450-001. The same mast P/N is used o…
Airworthiness Directives; Bell Helicopter Textron Inc. Model 205A-1, 205B, 212, 412, and 412CF Helicopters
This amendment adopts a new airworthiness directive (AD) for Bell Helicopter Textron Inc. (BHTI) Model 205A-1, 205B, 212, 412, and 412CF helicopters. This action requires inspecting the locking washer on each main rotor actuator (actuator) for twisting or damage to the tab and replacing any locking washer that has a twisted or damaged tab. Replacing certain locking washers, regardless of condition, is also required…
Airworthiness Directives; Bell Helicopter Textron, Inc. Model 204B, 205A, 205A-1, 205B, and 212 Helicopters
This document publishes in the Federal Register an amendment adopting superseding Airworthiness Directive (AD) 2000-15-52, which was sent previously to all known U.S. owners and operators of Bell Helicopter Textron, Inc. Model (BHTI) Model 204B, 205A, 205A-1, 205B, and 212 helicopters by individual letters. This AD reduces the retirement index number (RIN) life limit for the main rotor mast (mast); increases the RIN…
Airworthiness Directives; Bell Helicopter Textron, Inc.-Manufactured Model OH-13E, OH-13H, and OH-13S Helicopters
This document publishes in the Federal Register an amendment adopting Airworthiness Directive (AD) 2000-18-52 which was sent previously to all known U.S. owners and operators of Bell Helicopter Textron, Inc. (BHTI)-manufactured Model OH-13E, OH-13H, and OH-13S helicopters by individual letters. This AD requires a liquid penetrant or eddy current inspection of the threads on each main rotor blade grip (grip) for a cr…
Airworthiness Directives; Bell Helicopter Textron, Inc. Model 47B, 47B-3, 47D, 47D-1, 47G, 47G-2, 47G2A, 47G-2A-1, 47G-3, 47G-3B, 47G-3B-1, 47G-3B-2, 47G-3B-2A, 47G-4, 47G-4A, 47G-5, 47G-5A, 47H-1, 47J, 47J-2, 47J-2A, and 47K Helicopters
This document publishes in the Federal Register an amendment adopting superseding Airworthiness Directive (AD) 2000-18-51 which was sent previously to all known U.S. owners and operators of Bell Helicopter Textron, Inc. (BHTI) Model 47B, 47B-3, 47D, 47D-1, 47G, 47G- 2, 47G2A, 47G-2A-1, 47G-3, 47G-3B, 47G-3B-1, 47G-3B-2, 47G-3B-2A, 47G- 4, 47G-4A, 47G-5, 47G-5A, 47H-1, 47J, 47J-2, 47J-2A, and 47K helicopters by indiv…
Airworthiness Directives; Bell Helicopter Textron, Inc. Model 412, 412EP, and 412CF Helicopters
This amendment adopts a new airworthiness directive (AD) for Bell Helicopter Textron, Inc. (BHTI) Model 412, 412EP, and 412CF helicopters. This AD requires inspecting the upper left-hand cap angle (cap angle) and adjacent structure for a crack and, before further flight, replacing any cracked cap angle and repairing any crack in the adjacent structure. This AD is prompted by a report of a fatigue crack in a tailboom…